PX160
PX160
PX160
PX160
Pixelidy Drive is an LED dimmer that controls the light intensity of 6 PixElidy S. Its 16-bit resolution (i.e. more than 65,000 steps) gives it extremely precise dimming levels, a perfectly linear, jerk-free on/off curve and perfect LED stability even at very low levels.

It is controlled by a DMX signal, a protocol derived from stage lighting and renowned for its ease of use and reliability. It is also compatible with the RDM standard, allowing you to set parameters at any time.

With an LED modulation frequency of 488Hz, the light emitted is flicker-free, which is more comfortable for the eye. What’s more, this frequency is modulated to match that of cameras on TV and film sets.

The Pixelidy Drive units are connected by a proprietary cable that integrates power and signal, making them easy to install. It is supplied with 2 output whips.


Pixelidy Drive includes these components:

Pixelidy Drive

+

(2X) output whips

Synoptics

Required products

In order to work, the Pixelidy Drive needs the following product to provide power and intensity control.
The Pixelidy-Gate is the "bridgehead" of the Pixelidy system. As well as merging the 48V power supply and the data signal onto a single output, it provides electrical protection and isolates the signal from all the peripherals connected downstream. 
The P-cable allows to connect a Pixelidy drive to a Pixelidy lamp. It is available at different length from 0.5m to 5m.
The D-cable is a hybrid cable allowing to connect a Pixelidy gate to Pixelidy drives providing power and data. It is possible to link up to 12 Pixelidy drives. It is available at different length from 0.5m to 10m.

Technical specifications

General
  • Dimensions135 mm (w) x 69 mm (h) x 30 mm (d)
  • Weight160 g
  • MaterialsBlack anodised aluminium
  • Bus connection2 x 2+3 Pins male/female connector
  • Output connection2 x 6 pins female connector
  • Cable materialNylon PA66 flame resistance material
  • CoolingPassive
  • Operating temperature0 – 45°C
  • Warranty1 year
  • IP ratingIP40
Electrical
  • Voltage48 VDC
  • Current350 mA
  • Power18 W
Standards

CE – RoHS – REACH
EN62368-1:2020 +A11
EN60598-2-1:2021
EN60598-2-17 :2018
EN55032:2015+A1+A11
EN55035:2017+A11
EN55015:2019+A11
EN61547:2009

References

Products
  • ReferenceDescription
  • PX160/700Drivelidy for Pixelidy-S + Output whips (x2)
Cables
  • ReferenceDescription
  • PX321/0,5P-Cable (M6) ; 1 male plug + 1 female plug ; length 0,5m
  • PX321/1P-Cable (M6) ; 1 male plug + 1 female plug ; length 1m
  • PX321/2,5P-Cable (M6) ; 1 male plug + 1 female plug ; length 2,5m
  • PX321/5P-Cable (M6) ; 1 male plug + 1 female plug ; length 5m
The maximum length between the Pixelidy Drive and a Pixelidy S must not exceed 5m.
  • ReferenceDescription
  • PX320/0,5D-Cable ; 1 male plug + 1 female plug ; length 0,5m
  • PX320/1D-Cable ; 1 male plug + 1 female plug ; length 1m
  • PX320/2,5D-Cable ; 1 male plug + 1 female plug ; length 2,5m
  • PX321/5D-Cable ; 1 male plug + 1 female plug ; length 5m
The length between the Pixelidy Gate and the first Pixelidy Drive must not exceed 25 m.
The maximum total length must not exceed 60m.

Downloads

Pixelidy Drive commercial brochure
If you need CAD files or blue prints please contact us through the contact form